NSI 24 Temporary Earth Bond Kit

NSI 24 Temporary Earth Bond Kit bridging earth kit comes in a handy carry bag, complete with pole sets to be used as a temporary earth bond.

Each kit contains:

• 2 of 50mm2 8m Blue Aluflex Leads
• CE57 Earth Tape Clamp
• CE20/2 Earth End Clamp
• 2ft Upper Pole Assembly including OL1 Operating Socket
• 2ft Lower Pole Assembly
• PVC Carrying Bag

All Component parts can also be purchased separately.

The NSI 24 Temporary Earth Bond Kit has been tested at 15 kA/1 sec short current rating and for a continuous current rating of 300A.

It consists of a CE57 clamp and a two part operating pole. The clamp is supplied with two 8m long 50mm2 aluflex leads and a CE20/2 earth end clamp. It is suitable for application to clean or oxidized aluminium or copper tape 25mm – 100mm wide.

The operating pole is supplied in two 0.6m sections. The top section is fitted with an OL1 operating socket which engages with the CE57 clamp. The top section can also be used on its own or  fitted to the bottom section to extend its total length to 1.2m.

The use of either will depend upon the application and on the operator’s preference.